Home  >

Drum Motors & Coating

CALL US

KURT SØRENSEN

Sales & Service

kso@ellegaard.com

Direct: +45 8725 1943

Jutland

THOMAS B. KRISTENSEN

Sales & Service

tbk@ellegaard.com

Direct: +45 8725 1949

Jutland

KENNET K. CHRISTENSEN

Sales & Service

kec@ellegaard.com

Direct: +45 2121 833

Jutland

TORBEN MARTIN
JØRGENSEN

Construction engineer

tmj@ellegaard.com

Direct: +45 5183 9955

 

Zealand

Kay Lindahl
Bertelsen

Sales & Service

kab@ellegaard.com

Direct: +45 3021 2550

ZEALAND

coatings for drummotor, rollers, etc.

Ellegaard can provide you with a strong and durable conveyor solution by adding a layer of rubber of polyurethane (PU) on drum motors and rollers. We can add this function to all of our drum motors and rollers, but we can of course also improve your own material with a coating or a sleeve.

WHY ADD A COATING?

Rubber or polyurethane are the most commonly used materials for coatings and there can be many reasons for adding this to the sleeve of the drum motor or roller. The correct coating with a smooth or diamond shaped surface creates the optimal friction which ensures maximum grip on the conveyor belt. The coating have the added benefit of reducing wear and tear on the conveyor belt and also protect rollers and drum motor against corrosion from oil and other chemicals.

 

new coating

We manufacture our own Scandrive drum motor, rollers and sleeves at ELLEGAARD  and can produce most of these with special coatings to your specifications. Placing an order for these products with us ensures you of the correct guidance in which coating is best for your application. Whether it is for food, products with a high content of natural oils, heavy and abrasive materials or even something completely different, we will find the right solution for you.

 

RENOVATED COATING

Bring us your old sleeve, drum motor or other machinery where the coating has been worn down or destroyed. ELLEGAARD can remove or the worn down rubber or polyurethane (PU) and clean the sleeve for optimal adhesion. We then glue on and vulcanize the correct coating, and your sleeve, roller or drum motor is ready for use.

Which coating should you choose?

Rubber or polyurethane (PU) have different properties when used as coating on drum motors, rollers etc. A rubber coating on a drum motor will in many cases be enough to secure a good grip on the conveyor belt. The rubber coating also has the added benefit in that it is a simpel and cost effective solution.

Polyurethane (PU) is, like rubber, incredible resistant against certain fat, oil and chemicals and the material can be used on numerous surfaces. Polyurethane (PU) is also a very flexible material and can also be sprayed directly onto the surface without leaving any visible connections.

Rubber coating, smooth or diamond profile as illustrated here

Coating with VOLTA belting

  • White rubber with groove for stability
  • Black smooth rubber for better friction
  • White smooth rubber for better friction
  • Blue PU coating with teeth designed for Volta Super Drive
  • Sprayed black PU for better friction
  • White food grade rubber

coating of rollers

This short video show the process of glueing a rubber coating onto a sleeve.

Contact us on +45 8020 8020 for more information

CATALOGUE