Food

Tech. rubber

Components

Medicinal

Agricultural

Energy

Conveyor belts

Conveyor components

Conveyors - complete

Drum motors

Rollers

CALL US

CLAUS LAURSEN

Verkauf & Service

cll@ellegaard.com

Direct: +45 2888 8370

 

Jutland

KURT SØRENSEN

Sales & Service

kso@ellegaard.com

Direct: +45 8725 1943

Jutland

Jutland

THOMAS B. KRISTENSEN

Sales & Service

tbk@ellegaard.com

Direct: +45 8725 1949

 

Zealand

STEVEN MØLLER
OLSEN

Construction engineer

smo@ellegaard.com

Direct: +45 3021 2556

 

Scandrive steel rollers uses a technology, which means the roller can withstand much more stress over a longer period of time.

 

Ellegaard produces all types of rollers, and has short delivery times with production in both Roskilde and Viborg. Please contact our sales department for an offer, or for further information.

Below is a selection of our product range:

SCANDRIVE® STEEL ROLLERS

  • Wraps in food grade blue PVC
  • End caps in food grade POM
  • Sealed hygienic design
  • Built-in fixed axle shafts
  • External pillow blocks for 'click-on' of rollers
  • Pillow blocks in food grade 'non-squeaking' glide material (UHMWPE)
  • Diameter: Ø50 mm
  • Can be delivered in lengths from 90 - 500 mm
  • Allowed load: up to 200 N
  • Meets the IP69K standard

SCANDRIVE® IP69K ROLLERS FOR THE FOOD INDUSTRY

Our continuous development work has resulted in that we now are able to deliver ScanDrive® steel rollers with IP69K sealing. Here we have compact and robust rollers, which are able to perform optimally in almost all situations and conditions.

 

With an IP69K sealing, you achieve the highest possible encapsulation of the motor, and an even greater opportunity to meet the high demands placed on hygiene and cleaning, especially in the food industry. ScanDrive® IP69K motors can withstand high pressure cleaning and rinsing, including hot water cleaning, and can run under extreme conditions without dust or liquids entering the motor.

 

Test method

The test standard for IP69K specifies a nozzle supplied with water with a temperature of 80°C, a pressure of 8 - 10 MPa (80-100 bar), and a water jet of 4-16 litres/min. The nozzle is placed 10-15 cm from the equipment that is to be tested. The nozzle is held in place for 30 seconds in each of the angles 0°, 30°, 60°, and 90°. The equipment must during the testing be placed on a table that rotates with five revolutions per minute.

This is what the standard means:

The letter and number combination defines the encapsulation degree for dust and liquids:

 

IP = Ingress Protection

6 = Dust-proof

9K = Suited for high pressure cleaning and rinsing

 

DIN-standard

IP69K surpasses the German standard DIN 40050-9 for equipment that can withstand high pressure, high temperatures, and strong water jets.

 

CATALOGUE

Roller measuring guide

FACT SHEETS

FACT SHEETS

Ellegaard   tlf. + 45 8020 8020    fax +45 8020 8019   mail: pe@ellegaard.com